Sovereign FILM FACE SHUTTERING PLY

Capable enough to withstand the vibrations and forces dense concrete produces as it is being poured. Sovereign Film Face Shuttering Ply, reinforced with high-quality veneer is just the support you need.

Fully automatic Veneer Core Jointer provides single sheet of cross and panel core – resulting in greater strength and stability.

Bonded with unextended Phenol Formaldehyde Synthetic Resin (Conforming to IS: 848) and the surface is overlaid with 180 GSM Phenol Impregnated Film.

Made from tenderized veneers with special phenolic resin for bonding.

The sides are sealed to prevent water absorption and swelling.

FF23

FF30

FF34

Weight (Kg)

23

30

34

No. of Layers

9

12

13

No .of Cores

5

8

9

GSM Thickness

120

120

120

Density (Kg/m³ Approx.)

600-650

800-850

900-950

Grade

BWP

BWP

BWP

Confirmed Repetitions*

4-5 Times

8-10 Times

12-15 Times


*Under ideal test conditions

  • Excellent construction material.
  • Three times more load distribution capacity.
  • Less span cost during shuttering.
  • Reduced labour cost because of maximum reuse.
  • Better screw holding capacity.
  • Resistance to high temperature.
  • Mechanical & Physical Strength to bear vibration.
  • Do not drop from height.
  • Clean surface after 3-4 uses with mould oil.
  • Keep on flat surface.
  • Use proper nailing.
  • Fill up holes with putty.
  • After use, dry the panel before stacking.
  • Use corners to avoid damages.