Sovereign FILM FACE SHUTTERING PLY

Sovereign Film Face Shuttering Ply is the ultimate support for your construction needs due to its ability to withstand the vibrations and forces that dense concrete produces. Made from tenderized veneers and bonded with special phenolic resin, it ensures superior bonding and durability.

Bonded with unextended Phenol Formaldehyde Synthetic Resin and overlaid with 180 GSM Phenol Impregnated Film, it meets the highest standards of quality. Additionally, the sides are sealed to prevent water absorption and swelling, which further enhances its longevity and performance.

Durable Overlay

Bonded with unextended Phenol Formaldehyde Synthetic Resin (Conforming to IS: 848) and the surface is overlaid with 180 GSM Phenol Impregnated Film.

Enhanced Strength & Stability

Fully automatic veneer core composer provides a single sheet of cross and panel core, resulting in greater strength and stability. 

Enhanced Veneer Bonding

Made from tenderized veneers with special phenolic resin for bonding.

Water-Resistant Sealing

The sides are sealed to prevent water absorption and swelling.

FF23

FF30

FF34

Weight (Kg)

23

30

34

No. of Layers

9

12

13

No .of Cores

5

8

9

GSM Thickness

120

120

120

Density (Kg/m³ Approx.)

600-650

800-850

900-950

Grade

BWP

BWP

BWP

Confirmed Repetitions*

4-5 Times

8-10 Times

12-15 Times


*Under ideal test conditions

  • Excellent construction material.
  • Three times more load distribution capacity.
  • Less span cost during shuttering.
  • Reduced labour cost because of maximum reuse.
  • Better screw holding capacity.
  • Resistance to high temperature.
  • Mechanical & Physical Strength to bear vibration.
  • Do not drop from height.
  • Clean surface after 3-4 uses with mould oil.
  • Keep on flat surface.
  • Use proper nailing.
  • Fill up holes with putty.
  • After use, dry the panel before stacking.
  • Use corners to avoid damages.